Yard signs are everywhere — elections, open houses, school events, contractors, grand openings — and they are one of the least expensive printed pieces a business can buy. They are also read in a second or two by people driving past, which makes them unforgiving of cluttered layouts and small text. This guide covers the file setup and design choices that make a yard sign work.
Common sizes
Yard signs are most often printed on corrugated plastic (often called Coroplast, a brand name), typically 4 mm thick. Common sizes include:
- 18 × 24 in — the most common size; landscape (24 wide × 18 tall) is popular for campaigns and businesses.
- 12 × 18 in — smaller directional and event signs.
- 24 × 36 in — larger signs for more visibility.
As always, confirm whether the shop writes width or height first. "18 × 24" from one shop and "24 × 18" from another can describe the same sign in different orientations.
Orientation and stakes
Most yard signs are held up by wire H-stakes (also called step stakes). The two prongs of the stake slide up into the hollow channels — the flutes — of the corrugated plastic from the bottom edge. For that to work, the flutes must run vertically in the finished sign. If you order a landscape sign, tell the shop which way it will stand so they cut the material with vertical flutes. Get this wrong and the stake has nowhere to go.
Bleed and margins
Yard signs are cut from larger sheets, so the file needs bleed like any trimmed piece. Many shops ask for 0.125 in on each side; some want 0.25 in. Extend the background into the bleed.
Keep text and logos at least 0.5 in from the trimmed edge, and more if the sign will sit in a frame. Remember that the bottom edge is where the stake goes in and where grass and mud splash; keep critical information away from the very bottom.
Resolution
Because yard signs are viewed from a distance, photos at 150 PPI at final size are typically more than enough. For an 18 × 24 in sign that is 2,700 × 3,600 pixels. Logos and text should be vector. Low-resolution logos taken from websites or social media are the most common problem on yard sign orders — they look fine on a phone but blurry at two feet wide.
Design for a moving audience
People usually see a yard sign from a moving car. A few principles keep it readable:
- Few words. A name or headline, one supporting line, and a phone number or website at most.
- Big letters. A common sign-industry rule of thumb is about 1 inch of letter height per 10 feet of viewing distance. On an 18 × 24 sign, the main line should be as large as the layout allows.
- Bold, simple fonts. Heavy sans-serif type reads far better at a distance than thin, script or condensed faces.
- Strong contrast. Dark on light or light on dark. Avoid red on blue, yellow on white and other low-contrast pairs.
- One focal point. Decide what people should remember and make it the biggest thing on the sign.
- Easy web addresses. Short URLs are easier to remember than long ones. QR codes can work on signs people walk up to, but they rarely help on signs seen from a car.
Single-sided vs double-sided
A double-sided sign is printed on both faces so it reads from both directions of traffic. Supply either a two-page PDF (page 1 front, page 2 back) or two separate files clearly labeled, and confirm the orientation of each side with the shop. If both sides are the same, say so; if they differ, make sure each side is set up at the same size and orientation.
Color
Yard signs are usually printed directly on white corrugated plastic with UV-cured inks. Send CMYK artwork; bright RGB colors may shift when converted (see CMYK vs RGB). Large areas of white are simply unprinted plastic, so a white background is both clean and economical. Outdoor signs fade over months of sun exposure; durable inks help, but very light tints and subtle color differences will disappear first.
File format
A print-ready PDF at the exact sign size plus bleed is the safest choice. Embed or outline fonts, and don't add crop marks unless the shop asks for them. See PDF export settings for print shops for detailed settings.
Proofreading
A yard sign order often means dozens or hundreds of identical signs, so one typo is multiplied. Before approving:
- Read every word, especially names, phone numbers and web addresses.
- Call the phone number and visit the URL.
- Print the design on letter paper, put it across the room and check that the main line reads at a glance.
- Check that the orientation, size and single- or double-sided choice match the order.
Checklist
- Size and orientation confirmed; flutes vertical for H-stakes.
- Bleed as requested (commonly 0.125–0.25 in) and at least 0.5 in safe margin.
- Vector logos and text; photos around 150 PPI at final size.
- Few words, large bold type, strong contrast.
- Front and back files clearly labeled for double-sided signs.
- Everything proofread and tested.
More print-ready tools are listed on the Templates page.